Flyin' Miata sway bars (NA8 chassis)
Flyin' Miata sway bars (NA8 chassis)
Couldn't load pickup availability
Collapsible content
Description
Sway bars are used to make your car corner flatter and react faster by keeping the body (and all the weight) under control. Ours are set up for neutral handling and are adjustable so you can tailor the handling of your Miata to your own driving style.
Our swaybars are hot formed from 4140 CrMo spring steel. This means they`re stronger than the cold-formed bars found elsewhere. We`ve designed them to keep the same handling balance as your stock sways, but they have two settings in the front and three in the rear for fine-tuning. Includes urethane bushings with waterproof grease and front brackets. You will reuse your rear brackets.
1994-97 sizes are 1.0" front and 0.625" rear, and they're both solid. These bars have a different geometry than the ones found on 1990-93 models, so the stiffness difference is not as great as you might think from simply looking at the diameters. Also, because of this geometry change, we don't recommend using them on the earlier cars.
Instructions
Shipping
What does it fit?
Emissions
Emissions do not apply.
Warranty
lifetime
SKU
They fit and work great on the NA8C Eunos roadster, i had the ND ones installed on mine so I ended up going flyin miata again with my NA, there was no guarantee that they were going to fit, but they do. It probably is a tighter/ different fit to get the front one out/in due to the routing of the different ac lines, but its doable, even on the floor as long as you can lift or put the car on a ramp. A lift will always be easiest, even though you ahve to tighten the bolts for them on the ground under load. Rear was easy, takes all of 20 min without even lifting it and using hand tools. Makes the car handle flatter in corners for sure, still need to do adjustable links and better tires to get the full effects
Easy installation, definitely felt a difference when taking turns. Some bolts aren't provided so have to reuse the ones connecting the bushings but otherwise satisfied. :)
Adjustability is amazing. The instilation video on youtube is easy to follow for novices.
Best bang for your buck and makes a night and day difference . I installed with the “mildest” or “less stiff” setting and it’s still a major upgrade. If you’re reading this and on the fence DO IT. My only regret is I didn’t buy the adjustable endlinks at the same time
They fits perfectly and drastically improve the handling of the car