USPS shipments from our warehouse may be slightly delayed. Details

Welcome to Flyin' Miata!

Miata Performance Projects

Miata Performance Projects
Miata Performance Projects
Roll up your sleeves and get your hands dirty. 41 "how to" projects to improve your Miata. This is the practical book of the series.

Made in the USA

Availability: In stock



Shipping note: When ordered by itself, this book will be mailed via USPS. 

A good addition to anyone`s toolbox, Performance Projects walks through the most common jobs on a Miata. The book covers 41 projects for all levels of mechanic, from novice to experienced. Each project is clearly explained with large color photos to make it easy to understand. You`ll also find out how difficult your particular project is, what parts you`ll need, how much it`s liable to cost and what else you should do while you`re in there. Written by Flyin` Miata`s own Keith Tanner.

There are a few sample pages available so you can get an idea of what the book is like. Click on the project names in the list below to see them.

For 1990-05 Miatas. The 2004-05 Mazdaspeed turbo car is not specifically covered, but most of the projects still apply. As with all of Keith`s books, it`s autographed by the author - a Flyin` Miata exclusive!

Section 1 - Getting Started
Getting Ready
Oil Change
Shifter Boot Replacement
Setting the Timing
Preparing your Miata for the Track
Replacing the Spark Plugs
Changing the Fuel Filter
Headlight Replacement and Upgrade

Section 2 - Engine
Changing the Accessory Drive Belts
Changing the Valve Cover and Cam Angle Sensor Gaskets
Replacing a Timing Belt
Changing the Water Pump
Fixing Noisy HLAs
Repairing a Damaged Crank
Removing and Replacing a Miata Head
Retrofitting an NB Head on an NA Engine
Engine Removal
Installing an Engine
Installing a 1.8l Engine in a 1.6l Car

Section 3 - Cooling
Changing the Coolant
Replacing a Thermostat
Replacing the Radiator

Section 4 - Transmission
Changing the Transmission and Differential Fluids
Replacing or Repairing a Leaky Clutch Slave Cylinder
Installing a New Clutch or Flywheel
Installing a Torsen Limited Slip

Section 5 - Exhaust
Changing the Exhaust
Installing a Header

Section 6 - Brakes
Bleeding and Flushing the Brakes and Clutch
Lubricating the Slider Pins
Changing Brake Rotors and Pads
Installing Stainless Steel Brake Lines
Fitting Bigger Brakes to your Miata

Section 7 - Suspension
Aligning a Miata
Sway Bars
Replacing the Suspension Bushings

Section 8 - Body and Interior
Replacing the Convertible Top
Roll Bar Installation
How to Stripe a Miata
Installing New Gauge Faces

Additional Information

Additional Information

Part number 46-86000
TÜV approval available No
Fits: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 (non-MSM), 2005 (non-MSM), MSM
Manufacturer No
Flyin' Miata exclusive No
Fits Exocet? No
Proposition 65 Warning: Cancer and reproductive harm
California emissions No information at this time

Customer Reviews 3 item(s)

Every MX-5 Garage should have one
I refer to this book as my Miata Bible. It contains great advise on HOW TO and WHY to perform a task, not just a list of tasks like Haynes/Chilton. In the case of my copy it also contains my sweat, actual blood, and tears LOL. I've personally used it as a guide to replacing my clutch twice, water pump, belts, set my timing, and many other jobs. In conjunction with it is invaluable for the home mechanic, in my humble opinion. Personally, I make notes in the margins and the paper and binding quality it FAR superior to the cheap paper of the Haynes/Chiltons so I predict it will hold up better over time and preserve my handwritten notes.

Note from Keith Tanner: thanks so much for the kind words!
Review by Stevo / (Posted on 1/17/2020)
Wasted my money
Probably a good book for someone with a Miata pre 2003 (copywrite date) but not much use to an NC owner.

From Flyin' Miata - we apologize if the writeup wasn't clear. This book covers 1990-05 models only. At this time, there is no equivalent for the NC chassis.
Review by Notded / (Posted on 10/27/2015)
Quintessential, Essential
This book, quite simply, is the first item you should buy. Wether your experienced or new to wrenching you need this book as either review or a sage guide. One of my most basic questions, jack points, in covered in the very first section. Clear, concise, informative, humours, with excellent real photos. Other than being flat beoke there is no reason this book is not the first thing you buy.
Review by Joel / (Posted on 8/11/2015)
Instructions for this part are not currently available online.