LED corner lights for NA/NB
LED corner lights for NA/NB
SKU
SKU
Instructions
Instructions
Instructions are not currently available.
Data
Data
Fits: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2004 MSM, 2005, 2005 MSM
Emissions: Emissions do not apply.
There are no shipping restrictions on this item.
Warranty: 1 year
Share
Give your Miata a clean look during the day and high visibility at night!
During the day, the lights are either white (clear lenses) or dark grey (smoked). No distracting orange or red to clash with your beautiful paint. Your car just looks better, even if people don't know why.
At night, the chip on board (COB) LEDs to throw a bright amber (front) or red (rear) glow so everyone sees your car. These are lights built from start to be LEDs, not a stock housing adapted with an LED in place of the stock bulb. They also have a DOT marking.
Installation is easy. On an NA, simply unscrew your stock lights, plug in the connector and screw in the new lights.
NBs don't light up the rears from the factory, so if you want that to happen you'll have to do a little wiring and splice into your existing wiring. Or you can leave it as stock.
Sold as a complete set of four corner lights
Safety note: while these are very bright when illuminated, they are not retroreflective. That means that other car's headlights will not reflect off them when you've got your lights off, so your car may not be as visible to other traffic when it's parked.
Mazdas the worst for not including the connection for the rears of NBs despite having a blank for it. It would be sick if FM provided an optional addon for the parts to do the cable running for the rears. Otherwise, look great.
amazing!!
We buy Miatas because they're small, tossable, and a ton of fun. Sometimes it's tough piloting a small fish amongst a road full of whales. Thanks FM for making a safety-focused product. These are extremely bright and do a great job getting the attention of other drivers at night.
Went on like butter and look great. Only thing that’s a little tricky is figuring out which is the front/rear.
Lights installed easily and look great, however after a week the screws that came with it are rusty and have stained the clear lenses. Will be removing the hardware that it came with and replacing with stainless hopefully the rust comes off the light's.
We're digging into this with the supplier, this shouldn't happen.