Trade in your factory hoops for some real protection! The Hard Dog Sport is made of 1.75" diameter DOM tubing and sits 3" taller than the factory hoops to give you maximum clearance in case you have a bad day and end up upside down. The diagonals fit right through the cutouts for the stock hoops for a clean look. For added strength and chassis rigidity, two braces run backwards from the bar to the rear of the car. They're hidden below the top, but they provide extra support for the bar.
For even more protection, an optional Petty bar is available that will satisfy almost every track day organization. The Petty bar bolts on to the center of the bar and runs diagonally to the outside edge of the passenger's footwell. It can be removed for day-to-day use and bolted in for the track. Due to the way the bar crosses the passenger's seat, it is not recommended to carry a second person in the car with the bar installed. Top function is not affected by the Petty bar.
Given the position of the rear braces, this bar may not be accepted by all track organizations. Please check to see if you'd be able to use it in your area.
A harness bar is an option. This replaces the factory cross bar with one that is integrated into the rollbar and provides a mounting point for harnesses. This also means that you don't have to cut your stock "roll hoops" apart to reuse in the roll bar, simplifying installation. Stock seatbelt function is retained.
For 2006-15 Miatas with a soft top only. The shape of the roof on Power Retractable Hard Top cars is not compatible with this bar.
Shipping note: These bars will be drop-shipped from the manufacturer. These bars are usually kept in stock. If not, depending on where the bars are in the production process, it could take approximately 2-6 weeks for delivery. Since they're drop-shipped, the tracking number process isn't automated and could be delayed.
If you would like one shipped outside the US, please contact Hard Dog Fabrication directly.