FM jack adapter - second generation

Rating:
96% of 100
$19.99
In stock
Part number
M35-70000
Make it easier to lift your Miata without damage! The second generation is now available.

New and improved! Seriously. We've changed the material to make it easier on your car's finish and increased the versatility - while managing to cut the price by 20%.

Want to lift up both wheels on one side of your Miata at once so you can put it on jackstands or quickly swap tires? We do this all the time. Slide the jack under the middle of the car for a quick lift. Too bad Mazda only reinforced the seam at the front and rear of the car!

A customer asked us if we could do anything to solve this problem, and here's our answer. Our jack adapter sits on top of a typical floor jack and straddles that fragile seam, putting the load on the structure of the car instead. It's similar to the way the stock scissor jack is shaped, but offers significantly more surface area to prevent damage.

The new second generation design has two slots in it. One is a press fit on the pinch weld, which lets you stick the adapter on the frame rail before you slide the jack underneath. The other is wider, allowing the adapter to work with newer cars that have more plastic trim around the weld.

Fits all Miatas and many other cars. The slot is 7/8" deep and 3/8" wide, so as long as your other car has seams less than 7/8" high this should work. May not fit all jacks - a particularly deep or very small platform on the jack could cause a problem. The adapter has a 3" base.

We recommend you continue to use the factory lift locations on NC and ND Miatas due to some extra plastic trim. It will still make contact with some plastic parts, but we have not received any reports of damage since we started selling these parts back in 2010.

More Information
Part number M35-70000
Fits model year: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 (non-MSM), 2005 (non-MSM), MSM, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 MX-5 soft top, 2017 MX-5 soft top, 2017 MX-5 RF, 2017 Fiat 124 Spider, 2018 MX-5 soft top, 2018 MX-5 RF, 2018 Fiat 124 Spider, 2019 MX-5 soft top, 2019 MX-5 RF, 2019 Fiat 124 Spider, 2020 MX-5 soft top, 2020 MX-5 RF, 2020 Fiat 124 Spider
Fits Exocet? Yes
California emissions Emissions regulations do not apply
Manufacturer Flyin' Miata
Proposition 65 Warning: Cancer and reproductive harm
Flyin' Miata exclusive Yes
Write Your Own Review
You're reviewing:FM jack adapter - second generation
Your Rating
© Flyin' Miata. All Rights Reserved.