Speed Bleeders

Make bleeding your brakes easy! Speed Bleeders replace your original bleed screw and let you service your brakes without the need for a helper.

How do you use them? Just crack them loose, attach a hose, and pump away. An internal check valve will let fluid and air escape but won't let any air back into the system. When you're done, just snug them up again.

Sold in pairs. Stock calipers use one Speed Bleeder, so you'll need one pair for each end of the car. Wilwood and ND Brembo calipers use two per caliper, so you will need one pair for each corner. The exception is the current six-piston Dynapro 6A, which has only one bleeder. Please look at your calipers if you are unsure.

Available options.

NA/NB/NC front stock calipers, M8x1.0 thread
NA/NB rear stock calipers and clutch slave cylinder, M7x1.0 thread
ND front stock calipers (Brembo and stock), M10x1.0 thread
NC/ND rear stock calipers, M8x1.25 thread
Wilwood caliper (front or rear), 1/4-28 thread