Flyin' Miata door bushings (pair)

85 % of 100
IN Stock
The easiest way to make your car feel stiffer.

Please note that our printer farm is still running, but some of our printers are building parts for health care workers. This means it's taking us longer than usual to fulfill orders at the moment. We'll ship your parts as soon as we can.

Such a simple idea.

Your doors are held closed by the latch, but they're locked into place with a bracket that slides over a rubber bushing. That makes it easy to align everything, but it means the connection isn't as strong as it could be. In a convertible, the doors provide a surprising amount of structural rigidity if they're properly anchored.

These replace the soft rubber door bushings with a stiff, carbon fiber reinforced nylon replacement. The door is solidly locked into place, allowing it to reinforce the chassis. The effect is of a stiffer car with fewer squeaks. We have measured a 3% improvement in torsional rigidity on a 1990.

This is our third generation design. The new carbon reinforced nylon material  is as strong as the old Delrin version, but more resistant to dents and gouges. It also deflects less than Delrin so there's less chance of a bolt coming loose. We've also made the bushing taller to give 36% more overlap with the door cap. More overlap = less deflection = stiffer car. They're also 40% lighter. And on top of all that, they're 22% less expensive! They're produced in-house on our high-end Markforged printers.

Fits all Miatas.

Installation is quick and easy - simply remove the two bolts that hold the factory rubber in place and replace with this stiff piece. The door does need to be aligned properly, so if your Miata has an exciting history a bit of tweaking may be required. We've installed them in every car in our fleet.

Sold in pairs, enough for one car.


More Information
SKU M21-97105
Designed for: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 (non-MSM), 2005 (non-MSM), 2004-05 MSM, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 MX-5, 2017 MX-5 soft top, 2017 MX-5 RF, 2017 Fiat 124 Spider, 2018 MX-5 soft top, 2018 MX-5 RF, 2018 Fiat 124 Spider, 2019 MX-5 soft top, 2019 MX-5 RF, 2020 MX-5 soft top, 2020 MX-5 RF, 2021 MX-5 soft top, 2021 MX-5 RF
Fits Exocet? no
Instructions Click here
Carb Not applicable
Manufacturer FM
Proposition 65 Yes
Flyin' Miata exclusive? Yes
Warranty length 1 year
Write Your Own Review
You're reviewing:Flyin' Miata door bushings (pair)
Your Rating
© Flyin' Miata. All Rights Reserved.