Welcome to Flyin' Miata!

FM jack adapter - second generation

New and improved generation 2!
FM jack adapter - second generation
$18.99
Rating
11 Review(s)

Availability: In stock

OR

Customer Reviews 10 item(s)

1-10 of 11

Page:
  1. 1
  2. 2
Must have
This thing is wonderful to use.
Rating
Review by m1yeh / (Posted on 9/13/2019)
Perfect for an NC3
A must have for any Miata. I used it today to lift the and install a new set of wheels. It was a perfect fit on the 2013 PRHT pinch welds.
Rating
Review by Theresa / (Posted on 8/30/2019)
Square stock adds rigidity
Brazed similar fix years ago for jackstands, using square tubular stock. Tube stock fits the same space, but the second wall makes it far stronger, this []_[] versus this ]_[ Might be worth it on version 2.

(Note from FM: this comment refers to the original steel version)
Rating
Review by old geezer / (Posted on 12/17/2018)
top choice pinch weld adapter
Well built. A strong, quality made tool that is an essential item in your tool box. I use it on many different vehicles and it fits and works fabulously. I feel lost without it.

(Note from FM: this comment refers to the original steel version)
Rating
Review by gpzrider / (Posted on 8/13/2017)
Worth every penny
This is an awesome tool, and it works for just about anything with pinch welds that you use to jack up a car with.

(Note from FM: this comment refers to the original steel version)
Rating
Review by Joe / (Posted on 6/6/2017)
Fantastic
Have a '99 Miata and my roommate has a '90. Works amazingly, definitely makes jacking the car up way easier and quicker. No problems with durability so far.

(Note from FM: this comment refers to the original steel version)
Rating
Review by Dudsap / (Posted on 10/23/2016)
These work well with the light-weight 1.5 ton aluminum "racing" jacks.
I keep one of these in our home garage/shop and one in a shop I rent a few miles from home. Of course they work with almost any vehicle with jack points at welded seams.

(Note from FM: this comment refers to the original steel version)
Rating
Review by Mel / (Posted on 8/30/2016)
Works great for NA & NB, wish it worked for the NC.
Great Tool! I used to use it on my 2004 MSM to swap summer & snow tires in the spring and fall. Cuts the time in half, since I only have to move the jack once, instead of three (3) times (of course I still use jack stands to support the car while the wheels are off of the ground).

I just wish I could use it on my 2013 NC PRHT. :-(

(Note from FM: this comment refers to the original steel version)
Rating
Review by ratkinsonjr / (Posted on 8/26/2016)
works for Audi A4 too
I don't have a Miata but this is perfect for my 2007 Audi A4. The gap is just wide enough to fit and the width of the top pieces is the perfect size as well to not interfere with any of the plastic stuff.

Also, it fits in my Esco jack stands with the rubber tops removed though I think a 3.4-3.5" diameter would be ideal for this use as it could slide a little with the 3".

(Note from FM: this comment refers to the original steel version)
Rating
Review by Dansolo / (Posted on 5/29/2016)
Very good product.
Great tool! I did not think I could get my car on jack stands with how low it was jacking the front than the back with my Craftsman floor jack " 2004 MSM with stock shocks and H&R race springs". With the tool I was able to drive my car on to some 2x6 boards I cut to 18" and jack ( jack adapter used sightly behind the mirror NB) the car one side at at a time and put jack stands under it in the reinforced spots. After I got one side up I moved to the other side and everything was good and stable. the car has been on Jack stands for 5 days.

(Note from FM: this comment refers to the original steel version)
Rating
Review by 99lsfm2 / (Posted on 5/11/2016)

Write Your Own Review

You're reviewing: FM jack adapter - second generation

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Rating