Welcome to Flyin' Miata!

AEM X-series gauge/wideband kit

With black face and bezel installed
AEM X-series gauge/wideband kit
2 Review(s)

Availability: In stock


Customer Reviews 2 item(s)

2 Item(s)

Works really well, using it to diagnose some other issues the car has been having and it's been doing it's job great!
Review by Miata17 / (Posted on 8/28/2019)
Works Great with Megasquirt or Standalone
This was very easy to install and seems to be working well. I am using this with in a naturally aspirated 1990 miata with a Megasquirt ECU. I had some issues at first because the signal ground was not connected very well, so the numbers were sporadic.

To install, I used an Add-a-fuse in the footwell fuse box in a switched 5V location with a red 5 amp fuse. The ground wire was run through the firewall by the pedals. The White wire on the AFR guage (signal +) is run to pin 21 on the Megasquirt Options plug. The Brown wire (signal -) is run to pin 22, which is specifically the signal ground pin. One option is to run the red wire to the switched 5V option pin on the Megasquirt as opposed to the add-a-fuse I did.

Make sure to calibrate the O2 sensor BEFORE putting it in the exhaust. It must be clean open air when calibrated. Hope this helps anyone! Also, thank you to FM for calling me to ask if I needed any assistance. That was a very nice gesture and was very much appreciated.
Review by Jack / (Posted on 5/25/2019)

Write Your Own Review

You're reviewing: AEM X-series gauge/wideband kit

How do you rate this product? *

1 1 star
2 2 star
3 3 star
4 4 star
5 5 star