USPS shipments from our warehouse may be slightly delayed. Details

Welcome to Flyin' Miata!

FM turbo hush kit for NB

FM turbo hush kit for NB
FM turbo hush kit for NB
Make your FM II quieter.

Made in the USA

Exclusive to Flyin' Miata

Availability: On backorder
You can place an order now and we'll reserve it for you. We are expecting the parts around October 7th, 2020.

Description

Details

Want to cut down the amount of intake noise on your FM turbo system? This kit adds a top to your airbox and includes sound-absorbent foam to minimize the whooshing and hissing from your intake. It won't shut it up completely, but it will muffle the sound somewhat if you want to make your car more stealthy. There is no effect on performance.
 
Includes an airbox lid, hardware, and high temperature adhesive-backed foam. You will have to cut the foam to fit using the included templates. Fits all current FM II and Voodoo II turbo systems.

Please note: this is only the lid for the airbox and the foam. It does not include the baffle or a filter, as those come with the turbo kit by default. If you are building a custom intake, please contact us for a quote.

Additional Information

Additional Information

Part number 22-60110
Fits: 1999, 2000, 2001, 2002, 2003, 2004 (non-MSM), 2005 (non-MSM), MSM
Manufacturer No
Flyin' Miata exclusive Yes
Fits Exocet? No
Proposition 65 Warning: Cancer and reproductive harm
California emissions No information at this time
Reviews

Customer Reviews 3 item(s)

Intake air box lid isn't as pictured, there is a gap behind the headlight
Installation tip...mark and drill your holes with the intake heat shield wall mounted in place. If like me, you have it removed and make it a perfect fit, you might struggle once it's all mounted back in the car. Enlarging the holes was necessary and it'd help if FM recommended what size hole to drill. If they do I didn't see it.

As another review mentioned, there is an air gap behind the headlight, the box doesn't match and fill the area. The rubber trim doesn't fill the gap even if it is barely pushed onto the edge of the lid. I haven't driven yet but expect it'll work similar to 3" firm green foam without a lid, maybe better...only that gap IS going make it noisier.
Rating
Review by Jesse / (Posted on 4/19/2020)
Great idea, great concept but didn't work to well in my application as the fitment of the lid along with the foam provided, appeared to impede my air filter. The plus side, the lid did come with the mounting hardware but would recommend (1) of them to be
FM Turbo Hush Kit arrived as described but did not fit my FM airbox as its shown in the photos. Unsure if I have an "older" version of the airbox but it appeared to be substantially smaller with a larger gap towards the fender. Given, the provided weather strip installed as shown, it still has around 1/2" gap. Additionally, I installed the "foam" inside the airbox along with the lid as described in the instructions but elected to remove it as it visually looked like it would impede airflow. Multiple test fits with rearranging the turbine outlet and filter with no luck getting it not to impede. I ended up removing all the foam inside the airbox.

Note from FM: We have dyno tested this setup, the foam does not impede airflow or cause any power loss.
Rating
Review by Eric D / (Posted on 1/27/2020)
Functionally Great, but Has Other Issues
I really like the function of this product. However, are a few things you should be aware of that Flyin Miata doesn't exactly make clear.

First, the finish is not the smooth finish they show in the picture, it's very rough with deep gouging and just looks terrible. I had to sand it down myself to look halfway decent but it still doesn't look nearly as good as if it were done in a sheet metal shop.

It's also a pretty DIY kit. You will have to trace and cut the foam and rubber edging yourself. Not a big deal, but it would be nice if they made that clear. Just a picture of what you are getting would be nice.

Lastly, whoever selected the hardware for this should be flogged. There's no logical easy way to access all the fasteners. They just give you loose nuts and bolts. No way to access the nuts with the lid and shield in place. So you'd have to bolt it all together first, but then how do you access the inner bolt to secure the shield? Or get the filter on? I'm really curious what they expect you to do. Regardless, the best solution IMO, and what I did was to install three M6 rivnuts in the shield. Then it's really easy to get the lid off

Anyway, despite all that it's a great product. I basically hear no intake noise now except I have my bypass valve going VTA. I bet if I recirculated the bypass it would only be exhaust you could hear. The foam on the lid does touch the top of the filter but I have not noticed any affect on tuning or performance.

Note from FM: the kit is supposed to come with nut clips, not loose nuts. This makes it easy to assemble. If you order one of these kits and it does not come with the clips, please contact us.
Rating
Review by Jimbo / (Posted on 4/2/2017)
Instructions
Instructions for this part are not currently available online.