Stage 8 locking turbo hardware (8mm)

ON BACKORDER, ETA Jul 27, 2021
Part number

Prevent nuts and studs from ever backing out.

These Stage 8 locking nuts are a brilliant design. Tighten up the nut as usual, then slip the locking tab over top and use the C-clip to hold it. Voila, a nut that cannot possibly loosen. If you need to remove it, pop the clip off and remove the tab. Simple, effective, and reusable. We recommend this hardware on the turbo-to-manifold studs for any Miata that sees track use. Includes enough hardware to do four studs. That`s appropriate for one turbo. These M8x1.25mm fasteners are the correct size for our turbo hardware. 

Upgrade to the complete kit with Inconel studs if you want the strongest setup - highly recommended and standard on our turbo kit. 

More Information
Part number 36-00000
Designed for: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 (non-MSM), 2005 (non-MSM), 2004-05 MSM
Fits Exocet? Yes
California emissions Emissions regulations do not apply
Manufacturer Flyin' Miata
Proposition 65 Warning: Cancer and reproductive harm
Flyin' Miata exclusive No
Write Your Own Review
You're reviewing:Stage 8 locking turbo hardware (8mm)
Your Rating
© Flyin' Miata. All Rights Reserved.