Flyin' Miata Koni Stage 1 suspension package (ND/Fiat chassis)

Ships for free!
40 % of 100

From $1,059.00

To $1,088.99

In Stock

Part number
13-16310 2016+ RF/ST

The first step towards great handling. Now available for the RF as well as the soft top cars.

Customize Flyin' Miata Koni Stage 1 suspension package (ND/Fiat chassis)
1 x Koni Sport shock and bumpstop set (ND/Fiat chassis)   + $0.00

* Required Fields

Your Customization
Flyin' Miata Koni Stage 1 suspension package (ND/Fiat chassis)
Flyin' Miata Koni Stage 1 suspension package (ND/Fiat chassis)

In stock



    Flyin' Miata suspension packages are known as the best all-around suspension available for the Miata, and now you can get them for the newest generation. An excellent performance upgrade. Includes a set of four springs and shocks as well as a set of rear bumpstops. Only Flyin' Miata includes new bumpstops in their suspension packages.

    This package gives excellent body control without sacrificing the compliance that makes the Miata chassis work so well.

    Soft top springs:
    Front 300 lb/in, 13" ride height
    Rear 175 lb/in, 13.5" ride height

    RF springs:
    Front 300 lb/in, 13" ride height
    Rear 205 lb/in, 13.5" ride height

    The actual drop will depend on your starting ride height - we've seen stock heights vary by more than half an inch, with the Club and GT-S models sitting slightly lower. The end result is a good balance between spring rate and ride height, giving you enough room for everyday clearance and still being able to absorb bumps before hitting the bumpstops. We've known for years that running a soft spring rate with a lowered ride height is a recipe for disaster as the car slams into the bumpstops, so we always run enough spring rate to prevent that. It might seem counterintuitive that a stiff spring will be more comfortable than a soft one, but it's true.

    These Konis have different choices for the spring perch heights, but our springs are designed around specific perch heights. Please follow the included directions. 

    The shocks are adjustable for damping so you can dial in the car's behavior to your tastes. They've also got a lifetime warranty, so they're the last shocks you'll ever need to buy for the car.

    Please note that the optional headlight leveling system will need to be adjusted with the lower ride height. If your car has the ride height sensor, you can modify it with our headlight levelizer. Alternately, you can do a software recalibration that will teach the car what normal ride height is. Cars without the ride height sensor (some 2018 and later models) will have to recalibrate. If you do not address this, the headlights will aim low and you will have poor night visibility.

    More Information
    Part number 13-16310 2016+ RF/ST
    Designed for: 2016 MX-5, 2017 MX-5 soft top, 2017 MX-5 RF, 2017 Fiat 124 Spider, 2018 MX-5 soft top, 2018 MX-5 RF, 2018 Fiat 124 Spider, 2019 MX-5 soft top, 2019 MX-5 RF, 2020 MX-5 soft top, 2020 MX-5 RF, 2021 MX-5 soft top, 2021 MX-5 RF
    Fits Exocet? No
    Instructions Click here
    California emissions Emissions regulations do not apply
    Manufacturer Flyin' Miata
    Proposition 65 Warning: Cancer and reproductive harm
    Flyin' Miata exclusive Yes
    Warranty lifetime
    Write Your Own Review
    You're reviewing:Flyin' Miata Koni Stage 1 suspension package (ND/Fiat chassis)
    Your Rating
    © Flyin' Miata. All Rights Reserved.