Paco Motorsports eccentric locks

Rating:
60% of 100
$13.99
IN Stock
Part number
13-98221
Your alignment will never slip under load again.

If you've ever run your Miata on the track, you know that those alignment cams can slip. If you're lucky, it just ruins a session. You can change out the bolts on a regular basis and crank the torque way up on the nuts - but there's always that risk.

Until now! Paco Motorsports has come up with a simple solution to lock in your alignment perfectly. These locks replace the offset washer on an alignment bolt and prevent it from moving. They key into the same ridges used by the stock washer. The center section can be placed in any one of 16 positions, and you keep the same range of alignment - maximum negative camber is still maximum negative camber.

To use, align your car as normal. Then swap out the stock washer for the lock and retorque. It'll never slip again.

Sold individually. You can use as many as eight on a car, although not all cams are as prone to slipping. Fits all NA and NB Miatas with the H shaped alignment bolt. If you have the older D bolts, you will need to upgrade - we offer a kit for that. If you have tubular V8Roadsters control arms, these can also be used on the problematic outer cam on the front lowers.

More Information
Part number 13-98221
Designed for model year: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 (non-MSM), 2005 (non-MSM), 2004-05 MSM
Fits Exocet? Yes
Instructions Click here
California emissions No information at this time
Manufacturer Paco Motorsports
Proposition 65 Warning: Cancer and reproductive harm
Flyin' Miata exclusive Yes
Write Your Own Review
You're reviewing:Paco Motorsports eccentric locks
Your Rating
We found other products you might like!
© Flyin' Miata. All Rights Reserved.