USPS shipments from our warehouse may be slightly delayed. Details

Welcome to Flyin' Miata!

Search results for 'Turbo'

List Grid

Set Ascending Direction

151-200 of 301

  1. Parking brake cables not shown. Black is no longer available.
    $569.00
    A four-piston aluminum caliper on the rear with a parking brake? 3 lbs of weight loss per wheel? Only from Flyin' Miata! This is the back half of our Stage 2 brake setups. Learn More
  2. NA/NB Rear Upper Control Arm Bushings
  3. NA Not Included
    $3.79
    It's inexpensive, critical and difficult to replace. Always install a new one. Learn More
  4. O-ring for oil pump
    $1.09
    Replace when the pump is out. Learn More
  5. Look, a washer!
    $0.59
    It's hard to come up with more to say. It's a washer. For our magnetic oil plug. Learn More
  6. Magnetic oil plug
    $14.09
    It's an oil plug that's magnetic. Learn More
  7. dip stick tube o-ring
    $7.09
    Fixes leaks at the bottom of the dip stick Learn More
  8. Oil filter spacer
    $70.99
    Used in our NA6 oil cooler kits Learn More
  9. Better picture to come.
    $12.49
    Add a sensor port to a -8 AN line Learn More
  10. Accessory belt, PS only, NA/NB
    $12.99
    Accessory belt for cars with power steering but without air conditioning. Learn More
  11. NA PCV valves look different than this but use the same grommet
  12. ACL race main bearings for NA/NB
  13. LED corner lights for NA/NB
  14. FM windshield banner.
    $7.59
    The coolest Miatas have FM banners on them. Free with any order over $100! Learn More
  15. 949Racing aluminum tire valve
  16. Nickel vs Tungsten. Taken outside in full sunlight.
    $189.00
    The standard of the industry. Available in your choice of five colors. Learn More
  17. note the handy reference torque!
  18. 6UL wheel centering ring
  19. Sway bar grease packet
  20. Small Shift Boot (Miata not included)
    $17.99
    A lower-cost factory replacement boot for the NA and NB that also fits the NC. Learn More
  21. FM gas pedal extension only (NA/NB)
    $28.99
    By popular demand - as found in our pedal kits. Learn More
  22. Blank gauge panel for NA/NB dashboards
    $44.99
    Build your own gauge cluster. Learn More
  23. Paco Motorsports seat bolsters for NA/NB Miatas
  24. Race ND not included.
  25. Flyin' Miata weighted Delrin shift knob
  26. FM Cravenspeed shift knob
  27. Replacement top latches available in red or black
  28. Set of 6 soft-top bolts
    $11.79
    You may damage these when removing them. Learn More
  29. Carbon look
    The best hood pin setup out there. As used on our V8 conversions! Locking version. Learn More
  30. Yours may be green or black.
    $76.99
    Replace your main relay with this 80A unit. Learn More
  31. The GM flex fuel sensor

    Regular Price: $179.00

    Special Price $139.00

    The minimum needed to run flex fuel. Learn More
  32. LED corner lights for NA/NB - with tricky connector

    Regular Price: $84.99

    Special Price $72.24

    Function and style! What's not to love? Learn More
  33. Long ARP stud option shown
    $219.00
    Blueprinted, repacked bearings with a good casting! Now including nuts. Learn More
  34. Miata Hub ABS spacers with hardware
    $25.00
    Required to make ABS work on a MiataHub car Learn More
  35. Complete kit
  36. MiataHubs replacement bearing with included hardware
    $139.00
    If all goes according to plan, you'll never need this. But just in case... Learn More
  37. Alignment Bolt, 1990-05
    $11.89
    Eccentrics?! We've got yer eccentrics. Learn More
  38. 3" lift kit. Shown with 215/65-15 tires and spacers. Effective offset is +20 front, +5 rear.
  39. The lock in place.
    $12.49
    Your alignment will never slip under load again. Learn More
  40. Eccentric bolt lock kit
    $23.49
    New parts along with the exclusive Paco Motorsports eccentric lock. Learn More
  41. Our new 3D printed FM door bushings
    $37.99
    The new generation is stiffer, lighter, stronger and less expensive! Learn More
  42. Heavy duty sway bar mounts for NA/NB chassis
  43. Rear main/crankshaft seal for NA/NB
    $23.99
    We recommend changing this with every clutch change. Learn More
  44. The brace in place along with one of our shock tower braces.
    $64.99
    Give your braking a nice firm foundation. Black powdercoat. Learn More
  45. The separator
  46. Can be mounted on either side
    $34.99
    A front tow hook for any NA or NB Miata Learn More
  47. NA8 94-97 Intake Manifold Gasket
  48. Non-locking black
    The best hood pin setup out there. As used on our V8 conversions! Non-locking version. Learn More
  49. Flyin' Miata NA/NB dual hood lift kit
    $75.99
    Looks great and offers more access. Dual struts for a nice even lift. What's not to love? Learn More
  50. Drill and tap for installing hood lifts

List Grid

Set Ascending Direction

151-200 of 301