General specification

We're still finding out what some of the specifications are of the car. As they become available, we'll add them here.

Dimensions
Note - the Miata-based kit is a widebody with a lowered floor. In other words, it's about as roomy as this kind of car gets.
Length: 3340mm (approx)
Width: 1610mm (approx)
Wheelbase: 2325mm (approx)
Weight: 600 kg / 1320 lbs
Track: Same as the donor Miata

Left-hand side passenger compartment: 420mm wide
Right-hand side passenger compartment: 435mm wide
Footwell: 230mm wide
Tapering of footwell begins (from back of passenger compartment): 730mm
Floorpan length: 1300mm
Height of passenger compartment to the chassis siderail: 380mm
Height of footwell: 310mm

Have a different engine in mind?
Width at front chassis triangulation: 600mm
Width at rear bulkhead: 740mm
Chassis depth: 330mm
Engine protrusion below chassis bottom rail - Maximum: 75mm
Engine protrusion above chassis top rail - Maximum: 220mm
V8 Bonnet adds additional engine clearance of: 50mm

Drivetrain
Fuel capacity: 7.5 gallons (28 litres)
Optional fuel capacity: 11.9 gallons (45 litres)
Fuel pump flow: 47.5 GPH (3 litres/minute)
Fuel pump pressure: 29-72 psi (2-5 bar)

Suspension
GAZ shocks with adjustable perches and 20 compression/rebound settings (standard)
Independant suspension front and rear
Westfield-supplied steering rack (quick ratio available)
Rubber/metal suspension bushings (nylon upgrade available)

Body and chassis
Steel spaceframe with load-bearing aluminum panels
Fibreglass panels with colored gel-coat (no paint required, 12 colors available)
Optional one-piece ducted nose and hood
Full weather protection available