Miata parts

The kit uses the following components from the donor Miata. Sharp eyes will notice that all emissions components can be retained although we're not sure how the catalytic converter is packaged.

If you don't want to strip out a car yourself, Flyin' Miata will be offering an optional "pallet donor", a compilation of all the parts required to build a Westfield. Prices will vary depending upon the specification of the donor.

• Engine and gearbox - complete with inlet tract & exhaust manifold and oxygen sensor
• Air box and air flow meter and both pieces of pipe work and retaining clips and air box mounting rubbers
• Complete wiring loom, ECU, fuse boxes, dashboard switches, clutch pedal switch, sensors and relays
• Instrument panel cluster
• Upper steering column including steering wheel, crash pad, indicator stalks, ignition barrel and key and top and bottom cowl
• Lower steering column (needs modifying)
• Diff and casing complete with rubber mounting bushes and buffer plates
• Rear uprights, hubs, discs and calipers including top upright rubber bush still fitted
• Handbrake lever and cables, compensator & all fittings including retaining spring clips
• Steering rack, track rod end joints and nuts
• Front uprights, hubs, discs and calipers
• Wheels and tires and wheel nuts
• Propshaft (needs modifying)
• Driveshafts including joints, lock nuts and hub nuts
• Front bottom ball joints including castle nuts
• Horns
• Cooling fan
• Side repeaters
• Fuel filter and bracket
• Carbon canister, pipe work and mounting bracket
• Catalyst converter
• Interior mirror
• Screen washer bottle and pump
• Battery and mounting tray including clamp and fixings