Product support

ECU installation and tuning instructions

Most instructions are published in Adobe Acrobat format. You will need the free reader from Adobe if you don't have it. These files can be quite large, so be patient as they download.

Hydra Nemesis
  FM installation and tuning (2.7)

  Installation and tuning(2.6)
  Installation and tuning(2.1 and 2.5 firmware)
  More details on the Hydra software

1990-97
  1990-93 Link installation
  1994-95 Link installation
  1996-97 Link installation (plug in version)

  Link tuning manual

  Data Log Lab - excellent datalog analysis software (highly recommended)
  RTLink - free real time display and logging software that integrates with Data Log Lab
  Binary logging software (updated 05/07/04, included with Data Log Lab)

  Cold start numbers

  Four wire O2 sensor installation
  AEM wideband installation (gauge type)
  AEM wideband installation (no gauge)
  Wideband O2 autotuning setup
  Recommended O2 targets for Link users (stock and wideband sensors)

Old instructions for parts no longer available new:
  Rewire for 1996-97 OBD-II cars (to install a 1994-95 ECU in a 1996-97 car)
  Link mark I tuning (no knock or boost control, 1.6 only. No longer available new. Chips before 116M0718 only)
  Link mark I installation manual (the new chip, number 116M0718)
  Link mark II tuning manual (the new chip, number 116M0718)
  Link mark II tuning and installation (software before 12/06/00, no air temperature sensor)

1999 and later
  Link Piggyback installation and tuning (no longer available new)

All cars
  O2 signal modifier installation (current two-wire design)
  O2 signal modifier installation (original design with a separate pressure switch)
  GM coil instructions
  Link A/F meter installation
  Voodoo Box installation and tuning(current design)
  Voodoo Box installation and tuning(old black plastic box)
  Installing the air temp sensor in a Sebring supercharger (note - this applies to cars with an intercooler ONLY. Non-intercooled Sebrings should have the sensor installed before the supercharger, as the intake temperatures are too hot otherwise)

Back to Product Support